Sato DR300 User Manual download pdf (Page 22)

DR300 Operator Manual

• Close Cover.

Stop Position Adjustment

The correct stop position for dispense mode is the position where label is 2-3mm on

backing paper. Adjust OFFSET (VR) to obtain correct stop position.

• There may be cases when the dispenser does not function properly due to the

thickness of the labels used.

• Printing accuracy at peeling is V (Vertical) direction ± 1.5 mm, label size

direction ± 1.0mm.

• Dispenser unit is effective for label pitch 25-181mm. However, label size

limitation may vary with application conditions.

• Labels over 100mm may curl at dispense due to the nature of the material.

There is no remedy for this.

Chapter 4 - Setting of Label and Carbon Ribbon

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 95 96

No comments

Sato DR300 User Manual Page 22