Sato DR300 User Manual download pdf (Page 41)

DR300 Operator Manual

[6] Setting Default Value

To enter this mode, power on printer while holding down <FEED> and <LINE> keys

simultaneously.

Press <FEED> and <LINE> keys when power on printer, buzzer sounds, and press

<LINE> key to move cursor to [YES]. Confirm by pressing <FEED> key.

[7] Setting Service Mode (Default & Service Mode)

To enter this mode, power on printer while holding down <FEED> and <LINE> keys

simultaneously.

Press <FEED> and <LINE> keys while power on printer,

buzzer sounds and press <LINE> key to move cursor to

[NO]. Confirm by pressing <FEED> key.

Setting sensor level

<LINE> key : proceed to pitch

adjustment setting.

<FEED> key : selection of sensor

level and threshold

level.

DEFAULT

YES

DEFAULT

COMPLETE

DEFAULT

YES

SERVICE

MODE

Tctr [0.0v]

TH [0.0

SERVICE

LVL SET

FEED key

LINE key

Chapter 8 - Operation Panel

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 95 96

No comments

Sato DR300 User Manual Page 41