LM400e Series
Table of Contents ● Precautions for installation and handling……………………………..1, 2, 3 ● Unpacking……………………………………………………………………...4 ● Accessories…………………
Precautions for installation and handling Printer operation can be affected by the printer environment. Refer to the following instructions for
Avoid dust Dust buildup may result in poor print quality. This may cause not only malfunction but also shorten the life span of the printer.
▲ Power supply The LM400e Series require AC110-220V. Provide a stable source of electricity to the printer Do not share the power outlets w
Unpacking Taking the LM400e from the box and removing the protective molded cover and plastic cover, it is ready for installation. Printer Acc
Accessories Make sure you have received all of the following items in this package. If there are any accessories missing, contact your nearest d
Names of parts Operation panel: LCD for displaying messages, two operation keys, two-color LED for indicating printer status Side coverRibbon t
Label stopper Secures the roll label Platen roller (consumable part) Discharges the printed media Thermal head (consumable part) Prints
▲ Operation Panel Instructions and error messages are displayed in alphanumeric. LINE key Toggles the printer betwee
Setting roll label 1 Open the side cover. Side cover 2 Push up the purple head lock lever in the direction of an arrow to open the the
SATO ASIA PACIFIC PTE. LTD. 438A ALEXANDRA ROAD #05-01/04 ALEXANDRA TECHNOPARK SINGAPORE 119967 Tel: (65) 6271 5300 Fax: (65) 6273 6011
4 Place the roll label on the label supply spindle. Slide the label stopper and adjust to the label width. Roll label Label stopperLabel su
6 Turn the slide guide to vertical position and adjust the guide to touch the label front end slightly. Slide guide 7 Push down the pu
Setting fan-fold label 1 Open the side cover. Push the nylon rivet from the inside of the printer and remove the cover for fan-fold opening
4 Put the label through the fan-fold opening. Slide and adjust the label stopper to touch the side of label slightly. Fan-fold label Label
6 Turn the slide guide to vertical position and adjust the guide to touch the label front end slightly. Slide guide 7 Push down the pur
Setting carbon ribbon Use only SATO carbon ribbons. Use of other than approved carbon ribbons may result in unsatisfactory print quality and/or damage
4 Place an empty ribbon core on the ribbon take-up spindle. Ribbon core 5 From the ribbon supply spindle, thread the carbon ribbon under t
6 Push down the purple head lock lever in the direction of an arrow to close the head. Head lock lever 7 Close the side cover.
Adjusting Pitch Sensor 1 Open the side cover. Side cover 2 To adjust the pitch sensor position, Slide the green pitch sensor knob at the f
Turning on Power Connect the power cord and turn on the printer. Power supply After installing the printer, connect the power cord as instruc
Features of LM400e Series The LM400e Series – the rugged industrial generation of high performance printers with high resolution c
If your power outlet has two slots, use a 3- to 2-prong adapter. Turning the power ON Press the power switch to the direction of [I]
LM400e Series specifications Model: LM408e / LM412e Print method: Thermal transfer / Direct thermal Print resolution: 203/305dpi 8 d
Safety Precautions This Quick Guide contains important information for safety of the user. To insure proper use, please read these Safety Precau
: Do not dispose the printer by fire, or expose it to heat, or put in fire. : Unplug the printer from power outlet. : Connect ground wire to
: Use only the designated electrical power and voltage ● Use the type of power source indicated on the printer. Different voltage may cause fire or
outlet, and contact your nearest dealer, service center or the store where you purchased the printer. Do not attempt to repair the printer yourself.
shock. ● When disconnecting the power cord from the printer or a power outlet, pull on the plug. If not, it may cause exposure of wire, breaking of w
: Maintenance and cleaning ● Disconnect the power cord from a power outlet when maintaining or cleaning the printer. Ⅶ
Comments to this Manuals