SATO MB410i Specifications download pdf (Page 61)

Head check setting mode

In the head check setting mode, a check can be performed in two check-

ing areas: the printing area and the barcode printing area.

The presence of the head check function and the head check range set-

tings are set by the DIP switch (DSW) settings when the power is turned

on, by button pressing status, and by the cover status.

DIP switch settings

Note:

When the buzzer sound mode is enabled, the buzzer sounds upon startup.

Release the PRINT/FEED button to stop the buzzer. To check the settings for head

check setting mode, see the test print output (See chapter 6, Test Printing).

To end head check setting, confirm that the STATUS LED is on in green, then turn

power off. After changing the head check setting mode, be sure to restore the DSW

to their original settings.

DSW-1 DSW-2 DSW-3 DSW-4

(A) OFF ON OFF ON

(B) ON OFF OFF ON

DSW

settings

Button and cover

status

Function Default

(A) PRINT button + cover open Head check range set as

printing area

Head

check

range

set as

printing

area

FEED button + cover open Head check function set as

disabled

(B) PRINT button + cover open Head check range set as bar-

code printing area only

FEED button + cover open Head check function set as

disabled

Setting head check function

(STATUS LED flashes green)

Setting completes

(STATUS LED lights green)

DSW settings (A/B) + cover open + PRINT/FEED button + POWER

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 71 72

No comments

SATO MB410i Specifications Page 61