SATO M-84PRO Specifications download pdf (Page 20)

Section 2. Installation Operation Manual

Page 2-8 SATO M-84PRO

OPERATOR PANEL

The M-84PRO Operator Panel consists of five LED indicators, two momentary contact switches, three

DIP switches, four adjustment potentiometers and one LCD Display. All of these are accessible from the

front of the printer. They are used to set the printer operating parameters and to indicate the status of the

printer to the operator. After you power on the printer, familiarize yourself with the keys and indicators as it

will help you understand the configuration process

PRINT Potentiometer to adjust print darkness (fine tuning)

OFFSET Potentiometer to adjust amount of back/forward feed for dispenser/cutter/

tear-off position (+/- 3.75 mm)

PITCH Potentiometer to adjust home position of the label (+/- 3.75 mm). Affects stop

position of label feed, print position and dispense position.

DISPLAY Potentiometer to adjust the contrast of the LCD display.

POWER LED, illuminated when the power is on.

LABEL LED, illuminated when the label supply is not detected.

RIBBON LED, illuminated when the ribbon motion sensor does not detect any ribbon

motion (ribbout out condition).

ERROR LED, illuminated when there is a system fault such as an open print head.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

No comments

SATO M-84PRO Specifications Page 20