Unit 4: Standard Command Codes
“i” Programming Reference
4-45 PN: 9001158B
OFFSET
FUNCTION
Temporarily specifies the label stop position for each mode of operation.
FORMAT
<ESC>POabcc
a=Offset
0: Not used
1: Dispenser mode
2: Tear-Off mode
3: Label pitch
b = Offset direction
+: Advance label feed
-: Retract label feed
c = Offset range in dots (00 to 99)
Place after <ESC>A but before <ESC>V.
EXAMPLE
<ESC>A
<ESC>PO3+08
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
This command is not required to be specified for normal print operation.
(4-29)
Comments to this Manuals