SATO M-84PRO Specifications download pdf (Page 50)

Section 3. Configuration

Page 3-24 PN 9001105 Rev. A SATO M-84PRO

SELECT LANGUAGE

ENGLISH

This selection allows the user to select the character set used by

the printer. The selections are English, French, German,

Spanish, Italian and Portuguese.

1. Press the LINE key to advance to the desired languarge

setting.

2. When the setting is correct, press the FEED key to accept

the setting and step to the next display.

IGNORE CAN/DLE

YES NO

If the printer is placed in the Multi-Item Buffer Mode (DSW2-5 =

OFF), the user can chose to ignore CAN (18H) and DLE (10H)

commands used in bi-directional communications (see Section

6: Interface Specifications). If the Single Item Buffer Mode is

chosen (DSW2-5 = ON), this display will be skipped.

PRIORITY SETTING

COMMAND LCD

This selection allows the user to assign a priority for Print

Darkenss, Print Speed and Print Offset setting methods. If LCD

is selected, the setting established via the LCD display/menu

system will be used for an incoming label job, regardless of any

different command settings. If Command is selected, any

commands in the label job will take precedence and be used for

printing the job.

1. Use the LINE key to step to the desired priority.

Once the desired setting is selected, press the FEED key to

accept the setting and step to the next display.

LABEL RE-DETECT

ENABLE DISABLE

This selection allows the user to disable the feeding of a blank

label upon power up. If Enable is selected, the printer will

automatically feed a label until it detects a label enge. This will

correctly position the next printed label under the print head. If

Disable is selected, the printer will not try to detect the next label

and the operator is responsible for ensuring that the label is

correctly positioned before printing.

1. Use the LINE key to step to the desired setting.

Once the desired setting is selected, press the FEED key to

accept the setting and step to the next display.

IEEE1284

ACK SIGNAL 00.5

If the printer is placed in the Single Item Buffer Mode (DSW2-5 =

ON), this selection allows the user to set the width of the

IEEE1284 ACK pulse. In the Multi-Item Buffer Mode, this display

will be skipped.The range is 0.5 µsec to 10 µsec.

1. Use the LINE key to step the display to the desired setting.

The setting will advance in increments of 0.1 µsec each time

the LINE key is pressed until the setting reaches 10.0 µsec

when it will wrap around to the 0.5 µsec setting.

Once the desired setting is selected, press the FEED key to

accept the setting and step to the next display.

SERVICE MODE The Service mode is exited by powering the printer off and then

back on.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 81 82

Comments to this Manuals

No comments

SATO M-84PRO Specifications Page 50

Comments to this Manuals

Related products and manuals for Label printers SATO M-84PRO