SATO M-84PRO Specifications download pdf (Page 54)

Section 3. Configuration

Page 3-28 PN 9001105 Rev. A SATO M-84PRO

HEX DUMP MODE

In addition to the Test Print Labels, the printer can print the contents of the receive buffer in a

hexadecimal format to allow the data stream to be examined for errors and troubleshooting.

USER DOWNLOAD

WAITING

2. Press the LINE key. The printer is now waiting for the data to

be sent.

3. Transmit the download data command stream to the printer.

4. After the data has been received, the printer will beep and

print a status label. If it does not beep and print a status

label, the printer did not accept the data.

5. If the printer did not beep and print a status label, turn the

printer off and check your data stream for errors and start

the download process over.

6. If the custom codes are correct, press the FEED key to

accept them and terminate the download process. If they

are incorrect, turn the printer off without pressing the

ENTER key and begin the process again.

V 05.00.03.00

INITIALIZING

Displays the firmware during the initialization.

ONLINE

QTY:000000

The Hex Dump Mode is entered by placing DSW2-4 in the on

position and powering the printer on.

1. The printer is now ready to receive data.

2. Send the data stream to the printer.

3. The received data will be printed in a hexadecimal format4.

To return the printer to normal operation, place DSW2-4 in

the off position and power the printer off and then back on.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 81 82

No comments

SATO M-84PRO Specifications Page 54