SATO M-84PRO Specifications download pdf (Page 74)

Section 6. Troubleshooting

Page 6-8 PN 9001105 Rev. A SATO M-84PRO

NOTE: All characters are in ASCII.

UNIVERSAL SERIAL BUS (USB) INTERFACE

The Universal Serial Bus (USB) interface is a Plug-In Interface Module that can be installed

by the user. It requires a driver (shipped with each printer that has the interface installed) that

must be loaded on your PC and the PC must be configured to support USB peripherals using

Windows 98 or above. Details for loading the USB driver are contained in the USB Interface

Manual that is shipped with each printer with a USB Optional interface installed. Up to 127

devices may be connected to a USB port using powered hubs.

GENERAL SPECIFICATIONS

Connector: USB Type B Plug

Cable: 10 ft (3 m) max

Host: Windows 98 or above with USB Port

ELECTRICAL SPECIFICATIONS

Power Supply: BUS Power through cable

Power Consumption: +5V@80ma

LOCAL AREA NETWORK (LAN) OPTIONAL INTERFACE

A Local Area Network (LAN) interface is a Plug-In Interface Module that can be installed by

the user. It requires a driver shipped with each printer that has the interface installed. The

driver that must be loaded on your PC and the PC must be configured to run one of the

supported network protocols using a 10/100BaseT LAN connection. Details for loading the

LAN driver are contained in the LAN Interface Manual that is shipped with each printer with a

LAN Optional interface installed.

GENERAL SPECIFICATIONS

Cable: 10/100BaseT Category 5

Connector: RJ-45 Receptical

ELECTRICAL SPECIFICATIONS

Power Supply: Powered from printer

BI-DIRECTIONAL COMMUNICATIONS

This is a two-way communications protocol between the host computer and the printer, thus

enabling the host to check printer status. When Bi-Com 4 communications is selected, there is

no busy signal from the printer. The host must request the complete status from the printer,

including ready/busy. The host may request status in two different ways.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 80 81 82

No comments

SATO M-84PRO Specifications Page 74