SATO MB410i Service Manual download pdf (Page 46)

Unit 4: Operation and Configuration

Page 4-8 PN 9001190C MB400i/MB410i Operator Manual

NOTES:

• IrDA utilizes 3-wire cooked method of transporting data.

• IrDA communication is limited to a 5.9 to 7.9 inches (15 to 20 cm) range.

• The usable range may vary depending on the usage environment, or the capabilities of other

IrDA devices. Communication is compromised by direct sunlight or ambient light. In such a

case, block the strong light from entering the IrDA filter, or reduce the distance between the

two IrDA ports.

PRINTING VIA THE USB INTERFACE

To print with an optional USB cable (mini B type) connected to a PC or a handheld terminal,

perform the following operations.

Figure 4-10, Inserting USB cable

1. Pry open the USB/DIP switch cover and set the DIP switch 1 and 2 to ON position and set the

DIP switch 3 and 4 to OFF position.

2. Insert the USB cable into the connector. Make sure the shape and orientation of the plug is

correctly aligned.

3. Connect the other end of the USB cable to the connector on the PC or the handheld terminal.

For the connector on the PC or the handheld terminal, see the manuals provided with that

equipment.

USB cover

USB cable

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 85 86

No comments

SATO MB410i Service Manual Page 46