SATO M-5900RV Specifications download pdf (Page 55)

Operation Manual 7. Cleaning and Maintenance

M5900RV 55

7. Cleaning and Maintenance

Proper handling

The print head contains a precise printing surface that must be

carefully protected from mechanical damage. Extreme care must

be exercised during handling and installation to prevent scratching,

chipping, denting or otherwise damaging the exposed surface.

Cleaning

Only solvent, i.e. alcohol and other cleaning methods recom-

mended by SATO should be used to periodically remove paper res-

idue from the print head. Apply carefully with a cotton swab.

Frequency of cleaning depends upon paper type and mechanical

factors and should be completed at each label roll change. Only

clean when the printer is switched off and cooled to room temper-

ature to avoid thermal shock damage.

Do not operate the machine for at least 15 minutes after cleaning

to ensure the head is totally dry of any cleaning fluids.

Do not use abrasive materials in cleaning. However, SEG supplies

a special lapping film, SEG-No. 1938, to clean the print head sur-

face.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 61 62

No comments

SATO M-5900RV Specifications Page 55