SATO MB400 Service Manual download pdf (Page 37)

Unit 3: Setup

MB400i/MB410i Operator Manual Page 3-17

Figure 3-24, Ensuring Label Roll Rotates

5. Adjust the label guides by hand to ensure that the label roll can be rotated smoothly. Other-

wise the paper may not be fed correctly during operation.

When replacing a label roll of the same width as that used previously, adjustment of the label

guide is not necessary.

Figure 3-25, Closing the Printer Cover

6. Close the cover after confirming that the leading edge of the liner is outside the printer by at

least 10mm (0.4 inches).

7. For linerless label with perforation, pull the label upward to tear along the perforated line.

Ensure that the tear-off edge is just at the beginning of the red platen roller. Otherwise, re-

load the label.

10mm (0.4 inches)

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 85 86

No comments

SATO MB400 Service Manual Page 37