SATO MB400 Service Manual download pdf (Page 62)

Unit 4: Operation and Configuration

Page 4-24 MB400i/MB410i Operator Manual

PRINTING PROCEDURE

After the proper setup and basic configuration procedures, you are ready to print with the

MB400i/410i.

1. Make sure the host computer is ready to transmit data, and ensure that the STATUS LED is

lit or blinking. (Press the PRINT button to take the printer ONLINE).

Figure 4-20, Pulling the Printed Label Toward You

2. Start the print job from the computer. When printing is finished, pinch either the left or right

corner of the printed roll of label(s) and tear it off in the direction of the arrow in the diagram.

OTES:

• The number of sheets you can print is determined by the printer’s mode (continuous or dis-

pense mode).

• When printing linerless labels and you have torn the labels at a wrong place, stop the printing

and follow the instructions on the next page to correct the print job.

1234567

ABCDEFG

abcdefg

1234567

ABCDE FG

abcdefg

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 85 86

No comments

SATO MB400 Service Manual Page 62