SATO MB400 Service Manual download pdf (Page 45)

Unit 4: Operation and Configuration

MB400i/MB410i Operator Manual Page 4-7

INPUT AND OUTPUT SIGNALS

PRINTING VIA THE IRDA INTERFACE

Use the following procedure to print through the IrDA interface.

1. Ensure that the DIP switch 1 is set to ON and DIP switch 2 to 4 are OFF.

Figure 4-9, Positioning the Printer

2. Place the printer 7.9 inches (20 cm) away from the IrDA port of the computer or handy termi-

nal. Adjust the printer position so that the center of its IrDA filter projects a 30° conical area,

which contains the IrDA transceiver of the computer or handy terminal.

NUMBER

SIGNAL I/O DESCRIPTION

1 SD Output Data to the host computer from the printer

5 CS Input Transmission request signal from the host (Flow

control)

3- -

6 RD Input Data to the printer from the host computer

4- -

2 RS Output Transmission request signal from the printer

(Flow control)

7 SG - Signal ground

30°

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 85 86

No comments

SATO MB400 Service Manual Page 45