Unit 4: Standard Command Codes
E/Pro Programming Reference
4-127 PN: 9001096E
RARP
FUNCTION
Specifies if RARP is disabled or enabled. When enabled, RARP will automatically obtain IP
address in start up.
FORMAT
<ESC>WM
a=RARP
0: Disabled
1: Enabled
Place this command between <ESC>A start code and <ESC>Z stop code.
EXAMPLE
<ESC>A
<ESC>WM1
<ESC>Z
OUTPUT
This command does not result in printer output.
Setting can be printed on the factory test print.
NOTES
You cannot use this command in combination with other commands.
The set parameter will become valid after rebooting.
Default setting is as follows:
IP Address: 1 (RARP Enabled)
WIRELESS LAN
FUNCTION
Sets up wireless LAN.
FORMAT
<ESC>WZ
Format 1 To set up all items
<ESC>WZa,b,c,dddddddddddd,eeeeeeeeeeee,ffffffffffff,gggg,hhh,iii,j,k
,. . . . . zzzzzzzz
a=
Item number:
F: All items
D: Default settings
b . . . z
=
Set value (as shown in the rows below)
Format 2 To set up specific items
<ESC>WZaa,b
a = Item number: Valid range: 1-25
b = Set value: See table below for more detail.
Comments to this Manuals