SATO D508 Service Manual download pdf (Page 188)

Unit 4: Standard Command Codes

E/Pro Programming Reference

4-136 PN: 9001096E

INTELLIGENT COMMANDS

BATCH SEPARATOR

FUNCTION

To issue a tag with a special marking so that it can easily be divided on the stacker. Only

applicable to the XL400/410e printers.

FORMAT

<ESC>Ia

a = Batch separator type

1: Divided mark type

2: Separator method

Place immediately following the <ESC>A command.

EXAMPLE

<ESC>A

<ESC>I1

<ESC>V100<ESC>H200<ESC>P2<ESC>L0202<ESC>XMABCD

<ESC>Q5

<ESC>Z

OUTPUT

(4-66)

NOTES

When using the divided mark method and <ESC>Q is more than two pieces, place a black divided

mark on the edge of the first piece of label.

When using the separator method and the cut motion is available at the tag (center hold, horizontal

hole, angle R, eye-mark), the tag will be 12mm longer than normal length of the first piece of label and

the second tag wil be 12mm shorter than the first.

This command was formerly called the Divided Motion Specification in this document, prior to Version

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 289 290

No comments

SATO D508 Service Manual Page 188