SATO D508 Service Manual download pdf (Page 84)

Unit 4: Standard Command Codes

E/Pro Programming Reference

4-32 PN: 9001096E

MEDIA SIZE (MM)

FUNCTION

Specifies the media size in millimeters.

FORMAT

<ESC>A1aabbbccc

a = Media type: OT: Tag (Center hole tag, Side hole tag, Notched tag, I-

mark tag, Not sensor)

Media type: OL: Label (I-mark label, Gap label, Not sensor)

b = Height of media in mm: See the table below.

c = Width of media in mm: See the table below.

EXAMPLE

<A>

<A1>0T060042

<Z>

<A>

<l1>

<V>100<H>200<P>2<L>0304<XS>ABCDE

<Q>

<Z>

OUTPUT

NOTES

1. For specifying the media size, include the size of backing paper.

2. If the media setting on the printer side and [Media type] are not equal, a command error will

occur

3. If [Media size check] in expansion setting is enabled, the validity of setting on the printer

side, and the setting specified by the Media Size <A1> command will be checked. If their

settings are not equal, a pitch size error will occur.

4. If a pitch size error occurs, the data received by the printer will be cleared. Check the

Media Size <A1> command again and send the print data. The Media Size <A1> command

can be omitted, but this command is required when printing multiple media.

5. When the use of sensor is prohibited, this command will be valid whether you select tag or

label for [Media type].

[Validity]

Model

Media type Print area

compatibility

Height of media in mm Width of media in mm

TG308

Tag

Standard 025 to 300 032 to 080

Expansion 025 to 300 032 to 100

Label

Standard 019 to 300 025 to 080

Expansion 019 to 300 025 to 100

TG312

Tag

Standard 025 to 240 032 to 080

Expansion 025 to 240 032 to 100

Label

Standard 019 to 240 025 to 080

Expansion 019 to 240 025 to 100



1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 289 290

Comments to this Manuals

No comments

SATO D508 Service Manual Page 84

Comments to this Manuals

Related products and manuals for Print & Scan SATO D508