SATO CL608VA Operator's Manual download pdf (Page 123)

Label #2

Label #3

Label #4

Special Notes 1. If Vertical and Horizontal position is not specified in the command,

all data preceding the command will be mirrored.

2. This command can be used with the <ESC>% Rotate Fixed Base

Reference Point command (see Page 4-68). It cannot be used

with the <ESC>R Rotate Moving Base Reference Point command

(see Page 5-68). Please note that the reference point rotation is

dependent upon the location of the <ESC>% command in the

data stream

3. This command should not be specified more than once in any

single job.

4. This command cannot be used with commands requiring re-editing

of the print area, such as Sequential Numbering, Real time clock

or Copy Image Area.

5. Any data outside the printable area is not mirrored the command is

treated as a command error. Any print job containing the

<ESC>RM comand and without any print data will be treated as a

command error.

Mirrored Area

Section 4. Programming Reference

SATOCL Series Printers9001035 Rev. EPage 4-53

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 255 256

No comments

SATO CL608VA Operator's Manual Page 123