SATO CL608VA Operator's Manual download pdf (Page 99)

Clear Print Job(s) & Memory

Command Structure <ESC>*a

a = If the “a” parameter is not included with this command and

the printer is in the multi-buffer mode, this command clears

all print jobs in the printer memory, including the current

print job.

a = If “a” is included with this command, it specifies the internal

memory section to be cleared

T To clear the custom character memory

& To clear the form overlay memory

X To clear all internal memory

Example: <ESC>*

<ESC>*X

Placement: This command should be sent to the printer as an

independent data stream.

Default: None

Command Function To clear individual memory or buffer areas of the printer.

Input to Printer

<ESC>A

<ESC>*

<ESC>Z

Printer Output There is no printer output as a result of this command. The current

print job in the buffer will be terminated and all other print jobs in the

buffer cleared.

Special Note 1. See Memory Card Functions for variations of this command used to

clear data from the memory card (page 4-80).

2. It is not necessary to clear the printer’s memory between each print

job.

3. The primary purpose of this command is to clear all print jobs in the

multi-buffer mode. The “a” parameter can be used in either the

multi-buffer or single job mode to clear specific parts of the

memory.

4. When the “a” parameter is used, the section of memory specified

will not be cleared until the label is printed.

Section 4. Programming Reference

SATOCL Series Printers9001035 Rev. EPage 4-29

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 255 256

No comments

SATO CL608VA Operator's Manual Page 99