SATO CL608VA Operator's Manual download pdf (Page 52)

Calendar Set

If the Calendar Option is installed in the printer, the date and time can be set

manually using the LCD Display or via the <ESC>WT Calendar Set command (see

page 4-80). The last setting, set either manually via software command, received by

the printer will be the value used. The format of the display is YY/MM/DD hh:mm

(Year/Month/Day/hours:minutes).The date format is fixed and cannot be changed.

To enable the Calendar feature (if installed), press the LINE key until the underline

cursor is beneath the the YES. If the Calendar feature is to be disabled, press the

LINE key until the cursor is underneath the NO. When the desired setting is selected,

press the FEED key.

1. Year - The first display shown will have the two digit year selection underlined. You

can scroll through the dates by pressing the LINE key. The year number will

increase by one each time the LINE key is pressed until it reaches its maximum

legal value (i.e., “99” for the year digits) at which point it will wrap around to the

“00” setting.

2. Month - After you have set the correct year, pressing the FEED key will advance

the underline cursor to the two digit Month position. You can scroll through the

numbers corresponding to the month by pressing the LINE key. The month

number will increase by one each time the LINE key is pressed until it reaches a

value of “12” at which point it will wrap around to the “01” setting.

3. Day - After you have set the correct month, pressing the FEED key will advance the

underline cursor to the two digit Day position. You can scroll through the

numbers corresponding to the month date by pressing the LINE key. The date

number will increase by one each time the LINE key is pressed until it reaches a

value of “31” at which point it will wrap around to the “01” setting.

4. Hour - After you have set the correct date, pressing the FEED key will advance the

underline cursor to the two digit Hour position. You can scroll through the

numbers corresponding to the hour (using a 24 hour clock) by pressing the LINE

key. The hour number will increase by one each time the LINE key is pressed

until it reaches a value of “24” at which point it will wrap around to the “01”

setting.

5. Minute- After you have set the correct hour, pressing the FEED key will advance

the underline cursor to the two digit Minute position. You can scroll through the

numbers corresponding to the hour by pressing the LINE key. The minute

number will increase by one each time the line key is pressed until it reaches a

value of “60” at which point it will wrap around to the “01” setting.

CALENDAR ENABLED

NO YES

CALENDAR

01/01/01 01:01

Section 2. Installation and Configuration

Page 2-349001035 Rev. ESATOCL SeriesPrinters

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 255 256

No comments

SATO CL608VA Operator's Manual Page 52