SATO CL608VA Operator's Manual download pdf (Page 89)

Base Reference Point

Command Structure <ESC>A3H-aaaaVbbbb

- = This character is optional. When present, it specifies that

the horizontal offset is in the negative direction. If it is left out

the offset direction is positive.

aaaa = Horizontal Print Offset (see Note 5 for field range)

bbbb = Vertical Print Offset (see Note 5 for field range)

Example: <ESC>A3H100V0050

Placement: Preceding all images that are based on the new base

reference point

Default: Current V and H offset setting in the printer configuration

Command Function To establish a new base reference point for the current label. The

base reference point is the top left corner or “origin” from where all

print position commands are based.

This command may be very helpful when using labels less than four

inches wide to place images on the printable label surface. It may

also be used to move images past preprinted fields on a label.

Input to Printer:

<ESC>A<ESC>L0202

<ESC>H0100<ESC>V0025<ESC>XMNORMAL REFERENCE POINT

<ESC>A3H0300V0075

<ESC>H0100<ESC>V0050<ESC>XMNEW REFERENCE POINT

<ESC>Q1<ESC>Z

Printer Output:

Section 4. Programming Reference

SATOCL Series Printers9001035 Rev. EPage 4-19

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 255 256

No comments

SATO CL608VA Operator's Manual Page 89