SATO TG312 Instruction Manual download pdf (Page 43)

Section 3: Configuration and Operation

TG3 Series Operator Manual Page 3-13

3.6 USER MODE (Cont’d)

USER MODE

Menu Description

Adjusts the print speed that does not compromise print quality.

Setting range is between 02 and 10 IPS (inches per second) with a increment

of 01 IPS cyclically. The initial value is 6 IPS.

This setting adjusts the print darkness of the print-out with reference to the set-

ting of the DARKNESS in Adjustment screen.

Setting value can be set from 1 (lightest) to 3 (darkest). The default setting is 2.

Print Position Offset—which refers to the vertical and horizontal shifting of the

entire print area, relative to the start position of printing (V=0, H=0), defined by

default to be the bottom right hand corner of the media.

The V setting is for the Vertical print offset. A positive (+) offset means the print-

ing is shifted towards the print head; a negative (-) offset means shifting away

from the print head. If the PITCH POSITION setting has been used to offset the

vertical start position, then all Vertical offset adjustments are made relative to

that start position.

The H setting is for the Horizontal print offset. The + or - prefix determines

whether the offset is to the left or to the right of the reference point.

Setting value is indicated by dot, and the initial value, regardless of print resolu-

tion, is V:+000 H:+000.

Setting range differs by print resolution.

[8dots/mm] :L:±0 to 400 H:±0 to 400

[12dots/mm] :L:±0 to 600 H:±0 to 600

You can use this setting to determine whether zeroes are printed with a slash

across them or not. The zero slash can be set to either 0 or Ø.

If YES, [0] will be accompanied by a slash.

If NO, no slash will appear.

The initial value is YES.

* Slash zero (zero has a slash through it) is available in the following fonts:

U, S, M, WB, WL, XU, XS, XM, XB, XL, Outline font

This setting determines whether the space surrounding each text character is

of a fixed width, or whether that space is to be varied to be visually more pleas-

ant and proportional.

If selecting PROPORTIONAL, data will be printed without character spacing.

If selecting FIXED, data will be printed with fixed character spacing.

The initial value is PROPORTIONAL.

Print head

direction of label motion

ref point 0,0

H+ H-

V+

V-

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 151 152

Comments to this Manuals

No comments

SATO TG312 Instruction Manual Page 43

Comments to this Manuals

Related products and manuals for Label printers SATO TG312