SATO TG312 Instruction Manual download pdf (Page 57)

Section 3: Configuration and Operation

TG3 Series Operator Manual Page 3-27

3.9 ADVANCED MODE (Cont’d)

ADVANCED MODE

Menu Description

Specifying the printer motion right after changing the reference position by the

<#> command.

STOP: Pauses printing operation after changing the reference position.

CONTINUE: Continues printing operation after changing the reference

position.

The initial value is CONTINUE.

* This setting is enabled only when paper type is set to tag and the cutter is

ON.

The printer can be set to perform a check of the print head when printing each

label.

ENABLE: Head check is ON

Select ENABLE and press FEED button will proceed to HEAD CHECK menu.

DISABLE: Head check is OFF

Select DISABLE and press FEED button will proceed directly to SET

CALENDAR menu (if calendar IC is installed) or SELECT LANGUAGE menu.

The initial value is DISABLE.

If Head Check has been ENABLE, you can specify the print head checking to

be performed unconditionally, or only when barcodes are being printed.

NORMAL: Head check is performed on the entire print head.

BARCODE: Head check is performed only on position where barcodes are

being printed.

The initial value is NORMAL.

This screen is displayed only when HEAD CHECK is set to ENABLE.

Selecting the calendar setting.

YES: The printer enters date and time setting mode.

NO: Skip this setting and proceed to the SELECT LANGUAGE menu.

The initial value is NO.

This screen is displayed only when calendar IC is installed.

Set the Year/Month/Date and then set the time in 24 hour format. The high-

lighted cursor indicates the digit is active for adjustment.

Press / arrow buttons to change the setting value and press / arrow

buttons to move the cursor to next digit. Press FEED button to enter the set-

ting.

Enter the date and time twice. When the entered value of both screens match,

it goes to the next screen after saving the value. If not, the printer beeps and

goes back to the first entry display. The number of entries is indicated on the

right side of display.

This screen is displayed only when YES was selected in SET CALENDAR.

Enabling/Disabling the calendar check function.

ENABLE: Calendar check is ON

DISABLE: Calendar check is OFF

The initial value is ENABLE.

This screen is displayed only when YES was selected in SET CALENDAR.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 151 152

Comments to this Manuals

No comments

SATO TG312 Instruction Manual Page 57

Comments to this Manuals

Related products and manuals for Label printers SATO TG312