SATO D508 Service Manual download pdf (Page 127)

Unit 4: Standard Command Codes

E/Pro Programming Reference

4-75 PN: 9001096E

2D20 (MAXI CODE)

FUNCTION

Specifies Maxi Code of 2D code.

FORMAT

<ESC>2D20,a(,bbb,ccc,d...d) <ESC>DNmmmm,n...n

a=Mode

2: Delivery only (numeric)

3: Delivery only (alphanumeric)

4: Standard symbol

6: Reader only

b = Service class (001 to 999 numeric)

c = Country code (001 to 999 numeric)

d = Postal code

Mode 2 (0 to 999999999, numeric only)

Mode 3 (000000 to 999999, alpha-numeric with capital letters)

m = Data size (1 to 138 bytes)

n=Print data

Between <ESC>A and <ESC>Z but following <ESC>H and <ESC>V.

EXAMPLE

Example - Mode: Delivery only (numeric), Service class: 003, Country code: 081, Postal

code: 123456789.

<ESC>2

<ESC>V100<ESC>H100

<ESC>2D20,2,003,081,123456789

<ESC>DN0010,0123456789

<ESC>Q2

<ESC>Z

OUTPUT

(4-48)

NOTES

Enter parameters for b, c, and d when selecting modes 2 or 3, omit them when selecting modes 4 or 6.

Modes 2 & 3: 123 maximum numeric print data, 84 alphanumeric.

Modes 4 & 6: 138 maximum numeric print data, 93 alphanumeric.

The size of Maxi code printed will not be affected by data quantity.

When designating a parameter other than specified or when the print data size does not match, printing

will not be performed.

When selecting modes 4 or 6, set data size (m) to 12 to allow the Maxi Code to be read by scanner.

Refer to Appendix: Reference Table 32 for additional information.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 289 290

No comments

SATO D508 Service Manual Page 127