SATO D508 Service Manual download pdf (Page 217)

Unit 5: Optional Command Codes

E/Pro Programming Reference

5-25 PN: 9001096E

FIELD REGISTER SPECIFICATION

FUNCTION

To register the item inside of the field at the Format Register Specification <ESC>/N.

FORMAT

<ESC>/N,aa,n...n

a = Field number (1 to 99)

n = Print digit number (1 to 99)

EXAMPLE

<ESC>A

<ESC>CC1

<ESC>YS,01

<ESC>/N,1,3

<ESC>%0<ESC>V100<ESC>H200<ESC>P2<ESC>L0101<ESC>XMABC

<ESC>/N,2,5

<ESC>%0<ESC>V300<ESC>H40<ESC>B40208049123456

<ESC>Z

OUTPUT

This command does not result in output. Refer to <ESC>YR Format/Field Recall command.

NOTES

Specify the field number with the order start from the small value.

Print Vertical Position Specification <ESC>V and Print Horizontal Position Specification <ESC>H shall

be specified at every field. It will become default value if none of the specification is made.

When specifying foreign characters using foreign character code <ESC>H, a foreign character needs

four digits (three foreign characters equals twelve digits).

When specifying foreign characters using foreign character code <ESC>B, a foreign character needs

two digits (three foreign characters equals six digits).

Specify the register digit numbers of fixed field out of value 00.

Use this command as a pair with Format Register Specification <ESC>YS.

Due to memory limitations, it may not be able to 99 items.

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 289 290

No comments

SATO D508 Service Manual Page 217