SATO D508 Service Manual download pdf (Page 214)

Unit 5: Optional Command Codes

E/Pro Programming Reference

5-22 PN: 9001096E

CUSTOM GRAPHICS, STORE

FUNCTION

To provide similar functionality to the <ESC>G Custom Graphic command, but allows for the graphic

image to be stored in Expanded Memory. Use the Store command to send the graphic data to the

printer’s optional Expanded Memory.

FORMAT

<ESC>GIabbbcccddd{data}

aaa = Specifies character format of the data

H: Hex data

B: Binary data

bbb = Quantity of horizontal 8 x 8 blocks

ccc = Quantity of vertical 8 x 8 blocks

ddd = Graphics storage quantity (001-099)

{data} = Hex or binary data to describe the graphic image

Immediately following the <ESC>CC Memory Area Select command.

EXAMPLE

<ESC>A

<ESC>CC1

<ESC>GIH0020020010100038007C00FE01FF03FF87FFCFFFE07C007C007C007C007C007C007C

007C0

<ESC>Z

OUTPUT

There is no printer output as a result of this command. See <ESC>GR Recall Custom Graphics

command.

NOTES

Expanded Memory is required to use this command. Its maximum storage capacity is 999 graphics or

up to the capacity of the memory card used.

If a data transmission error occurs, the printer will beep, the ERROR LED will illuminate, and the image

must be transmitted again.

Each graphic to be stored must be sent in its own data stream.

Example of correct data stream:

<ESC>A

<ESC>GIHaaabbb001(DATA)

<ESC>Z

<ESC>A

<ESC>GIHaaabbb002(DATA)

<ESC>Z

Example of incorrect data stream:

<ESC>A

<ESC>GIHaaabbb001(DATA)

<ESC>GIHaaabbb002(DATA)

<ESC>Z

Do not use ASCII <CR> or <LF> characters (carriage return or line feed) as line delimiters within the

graphic data or the actual image will not be printed as specified.

Refer to Appendix: Reference Table 54 for additional information.

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 289 290

Comments to this Manuals

No comments

SATO D508 Service Manual Page 214

Comments to this Manuals

Related products and manuals for Print & Scan SATO D508