SATO M8485S Operator's Manual download pdf (Page 149)

Custom Protocol Command Codes

Download

Command Structure <ESC>LD,a,b,c,d,e,f,g,h,i

a = Replacement character for STX in ASCII or hex format

b = Replacement character for ETX in ASCII or hex format

c = Replacement character for ESC in ASCII or hex format

d = Replacement character for ENQ in ASCII or hex format

e = Replacement character for CAN in ASCII or hex format

f = Replacement character for NULL in ASCII or hex format

g = Replacement character for OFFLINE in ASCII or hex format

h = Auto-Online. Printer powers up in the On Line mode.

0 = Yes

1 = No

i = Zero Slash. Places a slash through the “0” character.

0 = Yes

1 = No

Example: <ESC>LD,{,},%,#,&,*,~,0,0

Placement: Immediately following the <ESC>A Start command and in

an independent data stream.

Default: Standard Protocol command Codes

Command Function Allows the user to defines custom Protocol Command codes.

Printer Input

<ESC>A

<ESC>LD,{,},%,#,&,*,~,0,0

<ESC>Z

Printer Output A Protocol Command code status label will be printed as a result of

the a successful download of a custom set of Protocol Command

codes.

STX = 7B ETX = 7D ESC = 25

ENQ = 23 CAN = 26 NULL = 2A

OFFLINE = 7E

AUTO ONLINE = YES

ZERO SLASH = YES

Press the “FEED” key to activate the User

Default or power the printer off to ignore

them.

Section 5. Programming Reference

SATO “S” Print Engines 9001034 Rev E Page 5-93

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 227 228

No comments

SATO M8485S Operator's Manual Page 149