SATO M8485S Operator's Manual download pdf (Page 71)

Special Notes 1. UPC and EAN bar codes are not affected by the different types of

narrow to wide ratios. Instead, the <ESC>D command adds

descender bars to these codes where needed to meet UPC

specifications. The <ESC>BD command puts decender bars and

human readable text below the symbol.

2. The Code 128, UCC 128, MSI, and Code 93 bar codes are not

affected by the narrow to wide ratios.

3. The Codabar, Code 39, Industrial 2 of 5, and Matrix 2 of 5 bar

codes are affected by the Character Pitch command. This

command must be placed before the Bar Code command.

4. See Appendix B for more specific instructions and detailed

information regarding individual bar code symbols.

5. Because of their unique characteristics, two-dimensional symbols

are covered separately (see page 5-95).

6. For UCC128, the FNC1 code is automatically inserted and the Mod

10 and Mod 103 check digits are automatically calculated.

7. For the MSI bar code, the check digit is not automatically calculated.

Section 5. Programming Reference

SATO “S” Print Engines 9001034 Rev E Page 5-15

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 227 228

No comments

SATO M8485S Operator's Manual Page 71