SATO M8485S Operator's Manual download pdf (Page 90)

Special Notes 1. Characters may be enlarged through the use of the Character

Expansion command (see Page 5-23).

2. Character spacing may be altered through the use of the Character

Pitch command (see Page 5-26). The default is 2 dots between

characters. It is recommended to use a spacing of 5 dots for

OCR-A and 1 dot for OCR-B.

3. You may also create custom characters or fonts. See the <ESC>T

Custom-Designed Characters command (Page 5-21).

4. A font must be defined for each field to be printed. There is no

default font.

5. Fonts U, S, M, OA and OB are identical to fonts U, S, M, OA and

OB on the SATO M-8400S printer. (Note: These fonts, except the

OA and OB fonts which are fixed in size, will be 33% smaller on

an M-8490S)

6. The proportionally spaced fonts XU, XS, XM, XL and XA can be

printed with fixed spacing using the <ESC>PS Proportional Space

command.

7. The matrices for the OA and OB fonts are scaled so that they will

remain a constant size according to the OCR-A and OCR-B

specifications when printed on different resolution printers.

M-8459S/M-8460S/M-8485S M-8490S

OA Font 15 dots W x 22 dots H 22 dots W x 33 dots H

OB Font 20 dots W x 24 dots H 30 dots W x 36 dots H

Section 5. Programming Reference

Page 5-34 9001034 Rev E SATO “S” Print Engines

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 227 228

No comments

SATO M8485S Operator's Manual Page 90