SATO M8485S Operator's Manual download pdf (Page 142)

Memory Card Function

Graphics, Custom Store

Command Structure <ESC>GIabbbcccddd{data}

a = Specifies character format of the data

H Hex data

B Binary data

bbb = Number of horizontal 8 x 8 blocks (see Note 7 for range)

ccc = Number of vertical 8 x 8 blocks (see Note 7 for range)

ddd = Graphics storage number (001-099)

{data}= Hex or binary data to describe the graphic image

Example: See Appendix C for detailed information on creating Hex

and Binary graphic files.

Placement: Immediately following the <ESC>CC Slot Select

command.

Default: None

Command Function To provide similar functionality to the <ESC>G Custom Graphic

command (see Page 5-42), but allows for the graphic image to be

stored in a Memory Card. Use the Store command to send the

graphic data to the printer, which is held in the optional memory card,

even if printer power is lost.

Printer Input

<ESC>A

<ESC>CC1<ESC>GIH002002001

0100038007C00FE01FF03FF87FFCFFFE07C007C007C007C007C007C007C007C0

<ESC>Z

Note: See Appendix C for detailed explanation on how to format a graphics data

stream.

Printer Output There is no printer output as a result of this command. See

<ESC>GR Recall Custom Graphics command.

Special Notes 1. You must have the optional Memory Card to use this command.

Call your SATO representative for details.

2. The maximum storage capacity is 999 graphics, up to the capacity

of the memory card used.

3. If a data transmission error occurs, the printer will beep and the

“ERROR” LED will come on. You must then retransmit the image.

See Appendix D for information on Memory Card error reporting.

4. Each graphic to be stored must be sent in its own data stream.

Section 5. Programming Reference

Page 5-86 9001034 Rev E SATO “S” Print Engines

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 227 228

No comments

SATO M8485S Operator's Manual Page 142