SATO M8485S Operator's Manual download pdf (Page 40)

1. The underline cursor will be positioned under the Horizontal Direction setting. Use

the LINE key to step the direction setting to the positive (+) or negative (-)

value. A positive selection increases moves the horizontal reference point for the

label to the right edge of the label, towards the outside, while a negative selection

moves the horizontal reference point for the label to the left, towards the inside of

the printer.

2. Once the correct direction setting is underlined, pressing the FEED key will accept

the setting and advance to the first digit of the Horizontal Offset adjustment.

3. Use the LINE key to step the setting to the desired value. The display will

increment one step for each time the LINE key is pressed. Pressing the FEED key

will accept the setting and advance the underline cursor to the next digit. Use the

LINE key to step it to the desired value and press the FEED key to accept the

setting and advance to the next digit.

M-8459S M-8460S M-8485S M-8490S

Horizontal Offset +/- 896 +/- 1216 +/-1024 +/- 1344

Note: The printer will not wrap images that extend beyond the print area. Any

part of the image that extends beyond the print area will be truncated.

4. Once the last digit has been correctly set, pressing the FEED key will accept the

setting and advance to the Sensor Threshold display.

ABCDEFG

Original Print

Line Position

Moved with both

Vertical and (+)

Horizontal Offset

Label Feed Direction

Inside Label Edge

Section 3. Configuration

Page 3-12 9001034 Rev E SATO “S” Print Engines

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 227 228

No comments

SATO M8485S Operator's Manual Page 40