SATO M8485S Operator's Manual download pdf (Page 35)

Normal Mode

When the printer is powered on, the readout should display the following message:

The LCD Panel will display the Online status on the top line of the display and the the

bottom line will contain the label quantity (QTY) status. The ON LINE message will

be changed to OFF LINE whenever the printer is switched offline by depresing the

LINE key. As soon as a print job is received, the QTY message will indicate the

number of labels to be printed. As soon as the label job begins to print, the display

will indicate the number of labels remaining in the print job that remain to be printed.

User Mode

To enter the USER mode:

1. The printer is first taken offline by pressing the LINE key once. The display will

change to:

2. When the display changes to OFF LINE, press the FEED and LINE keys

simultaneoulsy for more than one second.

The printer now displays the first USER mode adjustment (Print Darkness).

Print Darkness Setting

There are three (five on the M-8459S) Darkness (or heat range) settings. The

higher numbers represent darker settings. The current setting is indicated by an

underline under one of the range settings. To change the setting:.

1. Use the LINE key to step the underline cursor to the desired setting.

2. Once the correct setting is underlined, press the FEED key to accept the setting and

advance to the next adjustment.

Note: This setting can be overriden by software (see Print Darkness page 5-52).

After setting the heat range with this command, finer adjustments can be made using

the PRINT potentiometer adjustment on the Adjustment panel. See Section 4:

CLEANING AND MAINTENANCE, for additional information on how to make this

adjustment for optimum print quality.

ON LINE

QTY:000000

OFF LINE

000000

PRINT DARKNESS

1(L)

2(M) 3(D)

Section 3. Configuration

SATO “S” Print Engines 9001034 Rev E Page 3-7

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 227 228

No comments

SATO M8485S Operator's Manual Page 35